CURRENTLY SOLD OUT
About this product
Product Identifiers
BrandKrud Kutter
MPNRX012
UPC0618818761008
eBay Product ID (ePID)8014394416
Product Key Features
TypeRust Preventive/Remover
Additional Product Features
FormLiquid
Capacity1 gal
FeaturesBiodegradable
ForMetal
Ratings and reviews
Most relevant reviews
- 22 Apr, 2016Most favourable review
Good Value
This product works very well on light and heavy rust. I sprayed it on light rust and next day totally converted. With heavy rust some I used some sanding to remove lose bits and some I used wire brush by hand to remove lose bits and some needed to be sprayed again. It has always worked with little prep.Verified purchase: YesCondition: New
- 18 Oct, 2016Most critical review
Not what was expected.
I've been using quite a bit of rust converter this summer so I ordered this Rustex. There is a huge difference, which I wasn't aware at the time, between this and the other rust converters. It is not a converter/primer. The product description was exactly like the other products I had been using, except it's not a primer. You have to apply this product and after it's dried you have to wipe the powder off before applying a separate primer. You also run the risk of it raining before you apply the primer, so you're back to rust again. I waited days for a reply from the supplier about my question - Is this product the same as the other two products I've been using? I never received a reply from them and I didn't want to wait any longer for an answer. There's only so many good days to paint in a season around here. Anyway, big mistake. Now I'm left with well over one gallon of the Rustex.Verified purchase: YesCondition: New
- 21 Aug, 2019
RX01 Delivers.
I used an old spray bottle to apply. A couple of days to let it cure and dry, then paint. How easy is that? Bought another gallon just to have around. I have a ton of projects to use it on. KRUD KUTTER RX01 RUST CONVERTER is simply #1.Verified purchase: YesCondition: New
- 05 Sep, 2018
Not worth the high price that's asked for it.
I used this product on a diamond plate steel trailer bed, did everything according to the instructions (followed them exactly to the "T"). I even used a pressure washer after rinsing it. Hand dried it with clean towels until it was completely dry, let it stand for another 45 minutes and painted it as per the instructions. The next morning there were "patches" of the paint that were dull while the rest of the paint was a simi-gloss as it should be. The bed had had a de-greaser used on it twice before starting. I used the Krud Kutter on 3 other projects and all 3 did the same thing.Verified purchase: YesCondition: New
- 20 Jun, 2017
Easy to use, effective, easy clean-up
A little goes a long way. After a brief cleaning, you can brush this onto rust and it turns black. After a day it is ready to paint. I have successfully used this for years and recommend it.
Verified purchase: YesCondition: New
- 17 May, 2019
Good stuff works great
I was looking for a different one not sure if they make it still it would turn it hard like steal to repair it I used it on my 65 nova but this is great stuff the longer it sits the better it worksVerified purchase: YesCondition: New
- 19 Jul, 2019
Used it before I brought it!
Brother in law gave me some, used it on bathroom sink drain , clean it right off. Love this product!Verified purchase: YesCondition: New
- 10 Sep, 2019
Works Great!!
Works greats turns rust black for painting used it on the floor of my 1948 Dodge truck!!
Verified purchase: YesCondition: New
- 22 Jun, 2017
JUST WHAT YOU NEED
TITLE SAYS IT ALL, IF YOU HAVE RUST IT WILL TURN IT BLACK AND STOP IT SO YOU CAN PAINT OVER IT OR SAND IT BEFORE PAINTING WORKED FOR ME ON MY FLOOR BOARDS ON THE CAR. ANY KIND OF METAL THAT RUSTS IT WILL STOP IT.Verified purchase: YesCondition: New
- 07 Apr, 2017
Great product
Used this product on a rusted 47 year old chiller system. Sprayed it on with a cheap paint sprayer from Harbor Freight and it all worked flawlessly. The old rusted chiller now has a nice black smooth finish on it ready for paint. Just make sure you get rid of all of the loose flaking rust so you get a good finish. And if you're using a sprayer to apply it make sure you have plenty of ventilation and wear a good chemical mask.Verified purchase: YesCondition: New
