About this product

Product Information

The Husqvarna 357XP is a saw that is designed for sawing down trees, sectioning firewood, and trimming large limbs off of trees. If you are looking for a quality mid sized professional chainsaw but are unsure what to use, the Husqvarna 357XP can be the answer. This powerful tool provides you with 3.2 kW of power output, and it has a maximum speed of 9,600 rpm, so the teeth on the chain can chew through almost any log you put in front of the saw's bar.Offering highly powerful and rapid acceleration with the comfort of superior ergonomics and low vibrations, this slim cutting tool can pack the power and performance for a wide range of work in the forest. The handle is angled to give you a better grip while you are sawing wood, and it wraps around the side of the case to give you an extra handhold when you need a bit more control.The magnesium crankcase and forged three piece crankshaft on this saw can stand up to tough professional use, and the air injection cleaning system reduces wear while extending operating time between cleaning filters. This Husqvarna saw features a quick release air filter that allows you to easily remove it. This can make basic maintenance easier because you can check, clean, or replace the filter without a lot of extra tools and without spending a lot of time on the task.The Husqvarna model 357XP's angled front handle and LowVib dampeners can improve comfort and usability for tackling tough tasks. Everything you need to start and run these chainsaws is within easy reach, including the Smart Start starter cord that is designed to pull with 40% less resistance than models without this feature. The choke button and stop control switch are also positioned where you can reach them with your thumb when holding the rear handle of this Husqvarna 357XP saw. This can make operation a breeze.The chains on these saws can also be easy to adjust and maintain. When you need to adjust the tension on the chain of this Husqvarna saw, it is as simple as turning a screw on the side of the case. The adjustable oil pump is conveniently positioned. Its accessible location means that you can set it to your specifications to keep the tool oiled. When it is properly oiled, it can stay sharp enough to cut through even the hardest types of wood with ease. For fuel, the engine that drives this piece of equipment runs on basic gas.In addition to great performance, this tool can deliver extra safety in the form of an inertia chain brake. It can help reduce the chance of kickback when you're using the saw. These saws can support bar sizes ranging from just under 13 inches to just under 20 inches long. This can be big enough to cut through a large tree in one slice or in segments for extra large logs. The Husqvarna 357XP can be a good lightweight cutting tool. It can meet all your sawing needs while weighing in at just a little over 12 pounds.