About this product
Product Identifiers
BrandBosch
MPNT4B
UPC0000346452389, 0000346374506
ModelT4B
eBay Product ID (ePID)691439384
Product Key Features
Number of Items in Set1
Suitable ForMetal
ColorBlue
Cutting Depth3 1/2 in
TypeWheeled Miter Saw Stand
Dimensions
Item Length51.5in.
Item Height48.42in.
Item Width27.75in.
Width27.75in.
Item Weight76.7lbs.
Additional Product Features
Battery IncludedNo
Ratings and reviews
Most relevant reviews
- 11 May, 2021Most favourable review
Overall Good Miter stand
The T4B gravity rise Miter stand is practical and easy to move around. It sets up in mere seconds and it’s ready for work in under 30 seconds, which is impressive. This one came with the square extension tubes. Obviously, when extended fully, they do flex a bit, but nothing that can’t be supported with a long clamp of sorts. I can’t help but wonder if the version with two round bars on each side would make a big difference. The manual was comprehensive and the instructions were straight forward. I think it took me some 30 odd minutes to piece it together. Overall it’s a sturdy and well balanced miter stand. It’s effortless in supporting a 12” Bosch gsc 12 sd, well over 40 pounds. It’s too soon to tell how it will last, but first impression is good. For me the tubing might have been 1 or 2 gauges thicker, like the ts2000. The thickness is right on the edge between still strong enough and giving when tightening the assembly bolts, like the tablesaw stands after the ts2000…. After doing extensive research this stand meets my expectations and with proper care it should last.Verified purchase: YesCondition: New
- 20 Aug, 2019Most critical review
do not buy!
Do not buy this stand!! It does not fit thru a doorway with the door still on the jamb. its far to tall and less compact than my rigid stand i used for years. i can't believe they would make a stand so big it can't go into a room in a house. i expected for from the germansVerified purchase: YesCondition: New
- 15 Aug, 2019
great saw stand, get it if you have a bosch saw.
perfect stand for the Bosch miter saw. works great but be sure to use on a flat, level surface, because we're talking about a heavy tool, and a bumpy surface can make the whole set-up (saw and stand) off-balance, which is hard to put up and take down. BE SAFE! there is one deficiency I've found, and that is the outriggers which extend left and right, to support long workpieces, are pretty short, compared to my old saw, and they are weak and are easily bent. just gonna have to be careful with them.Verified purchase: YesCondition: New
- 31 Oct, 2015
Great energy and back saver
I have a wonderful older (1998) Bosch compound sliding 10" miter saw, but it weighs about 50 pounds. When I was younger, lifting it was no big deal, but at 65 it makes my lower back quite unhappy. When I first saw a picture of this stand, I thought I would really like one, but I hesitated because of cost. My wife said "buy it", so I did, and now I'm making better and more frequent use of the saw, even more than when I first had the saw, at age 48. Definitely one of the best purchases I've made in recent years. It folds up and gets my saw out of the way in no time. The extensions to each side are easy to use (though I'd recommend to Bosch that they slightly re-design the height adjusters). That is the only minor inconvenience on an overall great energy and back saving device. So happy I bought it.Verified purchase: YesCondition: New
- 08 Sep, 2016
BOSCH Gravity-Rise Miter Saw Stand
I really love this Bosch miter saw stand. It is very well-designed, easy to use, and extremely sturdy. I was able to mount my (25 year old) Makita sliding compound miter saw onto this stand, and used it to position and cut some massive (4x6x10') lumber quite easily. The best part is that the Bosch stand transforms into a vertical hand truck and enables me to transport my miter saw into and out of my garage with very little effort. Impressive piece of equipment!Verified purchase: YesCondition: New
- 05 Oct, 2017
Ok for the $$$
Comes completely disassembled with not one piece of directions. For the money I kind of expected more, the only thing that makes this better than the comparable DeWalt model is you can stand the saw up without bending over or putting any strain on your back. That being said the DeWalt is $100 cheaper and capable of holding more weight. If you don't like to or are unable to bend over to raise your saw to the working position but the Bosch T4B if you don't mind save yourself some$$$ and buy the DeWalt... P.s. the DeWalt comes mostly assembledVerified purchase: YesCondition: New
- 19 Dec, 2018
Great Saw Stand
High Quality Product! Works exactly as advertised. Once I watched a YouTube Video on how to install, it was easy to put together. Highly recommend this saw stand.Verified purchase: YesCondition: New
- 23 Nov, 2021
But USA, not China junk
The saw stand is made in China, not Germany, as Bosch would like you to think. On top of that, the one I received was missing the hardware kit and instructions. While they did agree to reimburse me for the cost from the local hardware store, they are just not the same as one would receive from the manufacturer. The box and packaging leave a lot to be desired. Guess that in the future I will be looking for US made equipment. Might be a little bit more money, but the quality is much better.Verified purchase: YesCondition: New
- 20 Jul, 2017
Bosch T4B Miter Saw Stand
The assembly can be a little tricky but once you get that done the stand is really nice & very easy to use. Anyone who needs to have true portability will find this valuable. My one gripe is the price - is a little higher than it ought to be BUT if you find portability and ease of use valuable then pay up and enjoy. I have a Kobalt 12in miter saw on mine and it fit very easily. Zero difficulty. Based on how easily my saw attached I think it's safe to say that almost any saw will fit.Verified purchase: YesCondition: New
- 04 Jul, 2018
Best stand on the market
Heavy duty, solid, easy to assemble (60 - 90 min.), simple moving parts that function well. If you use your saw often or semi-often this stand is a must. If you use your saw 2 to 3 times a year then it might be a bit big, heavy, and overkill.Verified purchase: YesCondition: New
