Picture 1 of 5
Stock photo
Picture 1 of 5
Stock photo
GELID Solutions FN-SX04-42 Case Fan - Black
Extreme Hardware (65689)
99.6% positive Feedback
Price:
£7.48
Returns:
30 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
4.5 CFM / 7.65 CMH. Silent Operation. 40mm (L) x 40mm (W) x 10mm (H). Ending Soon. Optimized Fan Blades. Fan Speed There is a separate area to leave a product review if you wish. We use a variety of different carriers to fulfil orders.
- Buy it nowGelid Solutions Silent 4 40mm Case Fan 4200 RPM, 4.5 CFM, 18.9 dBA (FN-SX04-42)
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandGELID Solutions
MPNFNSX0442
UPC4897025780705
eBay Product ID (ePID)646160958
Product Key Features
Maximum Airflow Volume4.5 CFM
Maximum Fan Speed4200 RPM
ColourBlack
Power Connection3-Pin
Voltage12 V
Bearing TypeHydro Dynamic Bearing
Fan Diameter40 mm
TypeCase Fan
Dimensions
Weight22.7 g
Width10 cm
All listings for this product
Ratings and reviews
Most relevant reviews
- 16 Oct, 2018Most favourable review
Good alternative to a high quality, low noise, 40mm fan.
First one didn't arrive. No problem, they shipped a new one and it arrived today. So thumps up for service. This is a decent alternative to the NF-A4x20 which is much more expensive. And my demand is not very high. I don't intend to run this at full speed but around ~600/800rpm. I'm going to mount it on a LSI raid card, to add some airflow over the heatsink. This will do that just fine. And it's only 10mm high which is nice if you're using it in a mitx case.
Verified purchase: YesCondition: New
- 03 May, 2020Most critical review
Quiet yes but bugger all airflow.
I got these to replace 40mm Fans in a rackmount switch but on trying then put it was obvious the airflow was tiny. I couldn't use them. They might be useful for cooling a northbridge or something.Verified purchase: YesCondition: New
- 24 Jul, 2019
Brilliant, quiet fan.
Very quiet even on 12v. The voltage can be reduced to make it slower and even quieter, but obviously this will reduce the flow of air. Brilliant product.Verified purchase: YesCondition: New
- 24 Feb, 2021
Good value, very quiet and great performance
High quality and run really quiet. I have installed them on my Ender 3 3D printer to replace the stock hot end and mainboard fans and they work great. Boought as a cheaper alternative to the Noctua fans everyone raves about, and I think these are just as good. The white colour also looks good on the printer. They are 12V so not ideal for this printer which runs on 24V, but wired in series they work well.Verified purchase: YesCondition: New
- 16 Jan, 2020
Nice small quiet fan that does the job
Good little fan. I used it attached to a heat sink on a SAS controller card. Plugged it into my mainboard fan header and it works fine. Small enough and quiet enough for me to no notice its there. Good price and delivery.Verified purchase: YesCondition: New
- 19 Dec, 2019
Revise in-house product care
Could do with better in-house product care as 1 fan housing (broken plastic) was slightly damaged although not bad enough to warrant a return.Verified purchase: YesCondition: New
- 07 Aug, 2017
2 x Pack of Gelid Solutions Silent 4 40mm Case Fans
Those are some seriously silent fans-my 3d printer is super silent now! Just watch out if you need another connector (be sure to wire it correctly) because the wires are all the same colour (black). Had an 80mm fan laying around and it had coloured wires, so wired it after the 80mm fan and it works perfect.Verified purchase: YesCondition: New
- 18 Apr, 2020
It's OK
What can you expect from a fan this small? They are fairly quiet but that's because they don't move much air. I'd like to see a slightly thicker variant that could actually pull some air through a dust filter because as soon as you put a screen in front of these airflow is reduced to virtually nil.Verified purchase: YesCondition: New
- 22 Jan, 2025
Quiet fan, I have used these before as a...
Quiet fan, I have used these before as a good replacement, just a spare.Verified purchase: YesCondition: New
- 14 Sep, 2019
Quiet and reliable fan
This item is okay but it doesn't have a lot of air flow. I would recommend it to cool down for example, network card or a raspberry pi which are not requiring a lot of air flow. This fan is very quiet and reliable. I never had any problems with it. Definitely would buy it again.Verified purchase: YesCondition: New
