Picture 1 of 1
Picture 1 of 1
Silverline 245072 Tapered Spindle 12mm
QF Trade and DIY Supplies (32781)
99.7% positive Feedback
Price:
£6.80
+ £3.40 postage
Ships today if you order in the next Ships today if you order in the next 7h 18m
Returns:
30 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
Threaded taper from 6.35mm (1/4") to 19.05mm (3/4"). 1/2" left-hand threaded bore for connection to grinders.
- Buy it nowSilverline 12.7mm (1/2") Left-Hand Threaded Tapered Spindle 245072
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandSilverline
MPN245072
GTIN5055058182500, 0772040243494, 5055330688683
UPC5055058182500, 0772040243494, 5055330688683
eBay Product ID (ePID)2254767048
Product Key Features
Power SourceCorded Electric
Voltage240 V
Disc Diameter2 in
ModelBuffing & Polishing Kits
Dimensions
Item Height12mm
Item Diameter2 in
Depth3cm
Width7cm
Length20
Item Weight118 g
All listings for this product
Ratings and reviews
Most relevant reviews
- 23 Jul, 2019Most favourable review
May need adapting to fit your grinder
These are probably oversized for the standard small bench grinder but the hex shaft can be cut down to make it fit. The thread fit both of my grinders although rather loose, but the hex shaft was too long for the motor shaft so I cut about 20mm off. About two thirds of the hex is bored oversized with the last third threaded to enable it to fit over the motor shaft, unfortunately it's not a snug fit on mine so only the rather loose thread is in contact and the spiral tip doesn't sit quite centered when spinning on either grinder.Verified purchase: YesCondition: New
- 16 Sep, 2018Most critical review
Great item but will not fit A Silverline 150mm grinder...
The only issue is that it will not fit a 150W Silverline Grinder 263511 without modification. You would think their own products would match up... There is a shoulder on the grinder that is bigger than the hole in the spindle .??? I had to drill out the spindle shaft so that it cleared the shoulder on the grinder. The shoulder prevents the shaft reaching the screwed part of the spindle core. The shoulder on the shaft is there to stop the washer and grind wheel going on too far. Once i counter bored the spindle by about 10-15mm the spindle screwed on and is now functional. You may or may not have the same issue on other grinders.Verified purchase: YesCondition: New
- 14 Dec, 2022
does not fit
does not fit my grinder may fit if i cut 20mm from end as plain portion is to long therefore thread does not engage .it appears reading other reviews i am not the first to find this problemVerified purchase: YesCondition: New
- 01 Mar, 2017
Tapered Spindle
Very Good Solid Spindle , Perfect for attaching to Bench Grinder for Polishing with a Buffing wheel . The Only Downside is that small buffing wheels will not screw on ,due to the diameter of the Spindle not being Tapered enough to accommodate smaller Buffing Wheels.Verified purchase: YesCondition: New
- 13 Jul, 2016
NOT FOR ME
Was not sure of the size required but it looked OK. when it arrived it was far too big at the taper to go into the wheel and did not fit the grinder. A solid spindle with the right grinder and wheel it may be perfect but for me it was useless. Could not be bothered to return.Verified purchase: YesCondition: New
- 30 Dec, 2017
this must be silverlines worst product ever, this is the second one ive bought and niether has a thread cut to screw it on to the polisher.
Verified purchase: YesCondition: New
- 17 Feb, 2018
Internal thread totally out of square
Wobbles so bad it's actually unsafe. Maybe I got a duff one?Verified purchase: YesCondition: New
- 24 Oct, 2019
Does not fit record grinders .
My mistake did not properly check the size.Verified purchase: YesCondition: New
- 04 Nov, 2020
Do not buy!
Arrived fairly quickly, but is useless. There is no internal thread, so can’t be mounted on any spindle. Waste of money.Verified purchase: YesCondition: New
- 23 Jun, 2017
Factory fault
There is no inner thread on the spindle.I guess factory fault.No way you can mount this on bench grinder,unless you do some modification( drill a hole and cut thread for stopper bolt)Verified purchase: YesCondition: New
