Check the item description to confirm this fits your vehicle
Picture 1 of 2
Stock photo
Picture 1 of 2
Stock photo
E-Tech XHT Xtremely High Temperature Clear Lacquer - 400ml
FIXRA (607790)
99.6% positive Feedback
Price:
£11.79
Returns:
30 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
Resistant to petrol, diesel, oil, anti-freeze, and other engine bay chemicals. Ideal for protecting surfaces, such as pipe work and bulkheads, from radiant heat and thermal fatigue. High temperature paints-.
- Buy it nowE-Tech XHT VHT Extremely High Temperature Paint CLEAR LACQUER Exhaust 400ml
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandE-Tech
MPNXHT006C
Manufacturer Part NumberXHT006C
EAN5018413710060
eBay Product ID (ePID)17026805692
Product Key Features
Paint Volume400ml
Primary ColourClear
All listings for this product
Ratings and reviews
Most relevant reviews
- 25 Nov, 2020Most favourable review
High Quality Paint/Lacquer, good coverage, enough to paint full exhaust. Very heat tolerant
I bought 1 tin of silver paint and 1 tin of Lacquer to paint a manifold, heat shield, and exhaust system. I just cleaned up the parts to remove loose rust and debris before spraying. If there's any grease on the parts, you need to remove it first. I applied the silver paint first. Went on easy. Just spray in short bursts and shake the can regularly. Allow 10minutes between applying coats. a warm room or sunny day outside allow the paint to dry quicker. Once the paint has dried sufficiently you can next apply the lacquer. This lacquer actually does give a good coat of lacquer. i was able to get at least 3 coats of lacquer from the tin for all the parts. Again apply the lacquer in short bursts, allowing 10-15mins between each coat. Allow the parts to fully dry over night to get the best results. Its quite resistant to runs and i only had a small run bearing in mind i was rushing the job so can't complain. Note: You must use lacquer over the paint to seal it properly, else expect the parts to rust quickly if water gets on them. I recommend this product. It costs a little bit extra but you get a product that actually works and does what it says it will do. It gives very good coverage too. they pack a lot of paint/lacquer into the tin and the entire quantity of paint/lacquer is expelled at the full pressure nice and evenly.Verified purchase: YesCondition: New
- 17 Feb, 2021Most critical review
Brake callipers
I used this clear coat on my ap calipers that I had already painted. The problem I had was in places there was a reaction between the paint and lacquer, they were compatible but in a few places it bubbled up and wouldn’t cure so I’m having a second attemptVerified purchase: YesCondition: New
- 30 Jan, 2020
Amazing stuff
I sprayed my crankcase due to flaking chrome, to Matt high temp black, but obviously it will be a nightmare to keep clean as a Matt. Sprayed this over and got a satin which is now petrol and scratch resistant but easier to clean too. My advice is give three coats of this over a high temp paint and your be pleasantly surprised by the quality. Best I've used ... ever . !!Verified purchase: YesCondition: New
- 25 Oct, 2018
XHT GLOSS CLEAR HIGH TEMPERATURE
Excellent service and products. I used this to revamp my misted plastic headlights after I sanded them with 1200 grit paper. Came back to life as New!! Saved £200 not having to replace the two headlights!! Brilliant products. ;-) Thanks for your helpVerified purchase: YesCondition: New
- 01 Jul, 2023
Durable finish
The E-Tech XHT paints and lacquers work exceptionally well, good coverage and consistent finish giving a resilient, durable coating to Engine/Exhaust casings/systems/components. I've used various manufacturers' offering over the years and, find this E-Tech paint very much to my liking.Verified purchase: YesCondition: New
- 25 Dec, 2024
Painted a bare metal exhaust on my son’s...
Painted a bare metal exhaust on my son’s motorcycle with 4 coats and it’s starting to rust. The exhaust was cleaned with panel wipe prior to painting and I followed the instructions on the can. Shame as it did look goodVerified purchase: YesCondition: New
- 23 Jun, 2018
Excellent for headlights
I had a set of badly fogged headlights on a vauxhall corsa, i used the wet sanding method using 1000 grit then 2000 and 3000 grit wet and dry, after which i throughly dried the headlights , then i gave them two coats of this high temp laquer , and the finished lights look like new!!, time will tell if the finish lasts, but as this is a flexible laquer , im hoping it does last.Verified purchase: YesCondition: New
- 29 Mar, 2024
Lacquer those motorcycle exhaust parts.
Sprayed and dried well, leaving a excellent finish.Verified purchase: YesCondition: New
- 14 Jul, 2021
Good engine laquer
Wanted this for a 15 year old engine top cover, it sealed the alloy well and baked on nice and smooth after a trip out.Verified purchase: YesCondition: New
- 05 Dec, 2018
Good tough finishing covering to any paint finish
Gives an excellent gloss finish over the satin black paint.Verified purchase: YesCondition: New
