Estimated by Wed, 7 May - Fri, 9 MayEstimated delivery Wed, 7 May - Fri, 9 May
Returns:
30 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
NewNew
Featuring an upgraded 1:15 tuner ratio for more precise tuning accuracy over the originals. 6 In line set for right handed guitars. 'Fender' stamped on the back of each tuner. Colour Nickel. All mounting hardware included.
Perfect if you want to swap your bolt-on modern tuners for a vintage-looking set - for me, split-post tuners should still be standard now, it's just how they're meant to be. I replaced the factory-fitted Schaller type on my Made-in-Mexico Strat, which was relatively straightforward for this non-luthier to do (thanks to 'how-to' videos on YouTube), but does require drilling new holes for the mounting screws (two sets are supplied: slotted for '50s and cross-head for '60s guitars). Depending on the diameter of the holes in your guitar's headstock, you may need a separate set of adapter bushings also (I did). So if you aren't confident about drilling holes in a guitar or fitting bushings, get your local luthier to fit them for you. They are smaller in diameter than modern bolt-on Schaller type tuners, so if your guitar has aged you may see a ring where the washers were. Buy hey, if you have a late '50s or '60s style Strat or Tele, these one-line Fender split-post tuners definitely look the business - highly recommended.
Bought these to replace my tuners on my squier classic vibe 60s stratocaster. I couldn't be happier. The tuning stability is 100% better and they feel much smoother in operation. Highly recommended.
Great vintage tuners with modern accuracy as the style allows
Nice quality vintage style tuners, due to the nature of a vintage style fender tuner spacing to look neat takes a little care full fettling but the trunk is get all the screws slightly loose first against a straight edge then even up the slight gap between tuners and tighten up.