CURRENTLY SOLD OUT

Marq Fog 400 Special Effects Fog Machine - Black

About this product

Product Information

The MARQ Black 400 LED Fog Machine delivers 1,500 CFM of fog for magic shows, entrances, and other special occasions. To set up, simply pour the fog fluid in, wait for it to heat up, and push the start button or use the wired remote to activate the machine. The unit works with various water-based fog fluids, including FogFluidGal, FogFluidQt, and FogFluid. A convenient fluid level meter provides current fluid levels, while colored LED lights provide additional pyro effect.

Product Identifiers

BrandMARQ
MPNFOG400LEDBK
GTIN0694318018514
UPC0694318018514
eBay Product ID (ePID)1253094285

Product Key Features

ControlManual, DMX
FeaturesWired Remote
Fluid Capacity0.5L
TypeFog Machine
ModelFog 400 LED black
Power400-799W

Dimensions

Item Weight4.35 pounds

Ratings and reviews

3.6
7 product ratings
  • 4 users rated this 5 out of 5 stars
  • 0 users rated this 4 out of 5 stars
  • 1 users rated this 3 out of 5 stars
  • 0 users rated this 2 out of 5 stars
  • 2 users rated this 1 out of 5 stars

Would recommend

Good value

Enjoyable

Most relevant reviews

  • Yea, it fogs, looks like the whole thing is on fire!

    The first one I received didn't work correct, the smoke didn't come out of the nozzle, it came out of the body of the machine. So I sent the machine back. Got the second one, yep, this one did the same thing only worse. The guy from the company said they would take this back too, I can't complain about the returns department, it's just a lot of inconvenience, 1/2 hour drive to the UPS store. So instead of the time and gas money,I took it apart and repaired the aiming of the feed tube myself. Funny thing , are all of them faulty?

    Verified purchase: YesCondition: New

  • MACHINE GETS VERY HOT AND DO NOT STAY ON

    I purchased this machine for a childs party After pouring the fog liquid in the machine and after the very first 15-30 second cycle the machine got extremly HOT!!!!! The machine then cut off, and then came on again every 10-15 seconds. The entire time the machine was extremely hot. So I turned the machine off and unplugged it because I did not want anything to burn up.

    Verified purchase: YesCondition: New

  • Works well for the price

    It is better built than the price suggests. Keep in mind it turns on and off as needs time to re-heat between shots, so it is not a full steady fogger. When it is on it produces a very large fog that is powerfully shot. The orange LED's are also very bright but have no on off switch. When the spray is on the LED's are on which is fine with me. It has a hand-held spray on/off switch but the cord is fairly short. Other than that I think this is an excellent fogger for the price.

    Verified purchase: YesCondition: New

  • works great. thank you

    5 star.

    Verified purchase: YesCondition: New

  • Awesome but defective.

    This lil fog machine is anazing, really puts out the fog and the lights give a Pyro effect. We descided to purchase it based on the reviews and youtube videos. However, I read one bad review which said some are under re-call as a fire hazard...I recieved one of these I think. When I first started the machine the fog output was lousy, only shot out a few inched, smoked like a dragon, not at all like the videos. I was goingvto return it but descided to see if it was the nozzel...IT WAS. Once fixed it worked like a champ. Not a complicated repair, but definitely had to be done. As a certified firefighter, electric and plumbing certified...it descided to investigate. I unplugged the machine and removed the cover. The interior of the machine was drenched, dripping out fluid everywhere. Once dried and cleaned up I removed the heating element (a few Phillips head screws) and found the nozzle was bent down inside the heating element box. Thus no steam could escape the machine properly. A quick bend to horizontal with some pliers, checked the alignment thru the exit hole, and reassembled the machine. Work like a champ... amazing lil machine. FYI...if the repair had not been done I'm certain the machine would have shorted out or badly corroded, it was definitely a fire hazard. EASY SAFETY INSPECTION BEFORE YOU OPERATE ...look in the hole where the fog exits, if you don't see a little pipe sticking out ( just dark or some insulation), do not operate this machine....RETURN FOR REPAIR! 5 stars for awesome, 1 for being in need of repair...avg =3 stars

    Verified purchase: YesCondition: New

More items related to this product