Ultra noiseless pups, neck is great sounding, bridge is not a full fat hum bucker tone but a single coil on steroids, good but not a metal pup. Quality of components is really high, no soldering required. Fir my tastes I would keep the neck but use a Dimarzio chopper T in the bridge if you want a real overdriven bridge tone.
I wanted a telecaster that was a little less bright than the standard Tele set up but still retaining the bottom and middle tones as I normally play rhythm guitar. This set gave me far more tone control than I was expecting and the neck pickup is probably one of the best I have ever played. In fact the pickups gave everything I wanted and still retained the Tele bright twang...result! Fitting is simplicity itself and there is enough movement in the cabling to enable me to mount the control plate with the switch at the bottom end and the volume at the top.(personal preference). The only problem I had was that the non Fender scratch plate I was using was very tight around the neck pickup at the ends. However it was easily remedied with the tip of a soldering iron. Total fitting time 20 minutes tops. I really like these pickups and will probably fit a similar set to a new Telecaster I have under construction at present.